Portable Thermal Stencil Transfer Printer

Weighing in at under three pounds, Electrum's portable thermal stencil copier machine is lightweight enough to toss in your carry-on or backpack for your next convention or guest spot – even on those budget airlines. 

Transfer any print to a ready-to-ink stencil. For best results, prep the skin with Electrum Premium Tattoo Stencil Primer (available in 2 oz. bottles, also perfect for your on-the-go set-up). 

With no belts or knobs to fiddle with, this printer makes stencil transfers quick and easy. This is your low heat, low noise, low hassle travel companion!

MACHINE SPECS:

• Type: Transfer Machine
• Scanning Mode: Cis
• Effective: 210mm
• Horizontal: 8dot/mm
• Vertical 7.7line/mm
• Document type: Fine/Photo
• Document size: A5/A4 (US letter)
• Document thickness: 0.06mm~0.15 mm
• Recording mode: Tph
• Effective printing: 210mm
• Power: 100-250VAC 50Hz/1.2A
• Power consumption: Standby 10W
• Working temperature: 5C~35C
• Relative humidity: 20%-80%
• Weight: 2.64 lbs/1.20kg
• Dimensions: 11.5"x6.5"7" (29.3cmx16.3cmx7cm)

Check out the introduction book for step-by-step set-up instructions, calibration guide and transfer keys with pictures.